Company News
Kitchen Cabinets carcase acceptance notice
1, Flatness. Before install the countertop, shake the cabinet carcase to check its solidity, and after the installation, use the horizontal ruler to measure the cabinets.
2, Edge. For quality kitchen cabinets, its edge banding is delicate, smooth, feel good, straight line closure and with fine joint. Big brand manufacturer, edge banding machine one time finishing edge banding, decapitating, trimming, chamfering and polishing process, uniform coating, sealing pressure to stabilize sticking to ensure the most accurate size. While for workshop type small factory, artificial glue, sticking and pressing, edge, polishing, due to uneven pressure, the edge is not strong in many places, can also cause harmful gas volatilization plate into the air.
3, Waterproof aluminum foil. The sink cabinet plate is affixed with a whole piece of waterproof aluminum foil, and three sides to flip up 1cm to prevent condensed water of the tank or pipe to erode the kitchen cabinets.
Kitchen cabinets door acceptance notice
1, Color. Check whether the door color and material are consistent with the order. A little difference in the color of the door and the color card is is normal, but do a finished whole cabinets door color does not allow a color difference.
2, Positive and Negative side of the door. Confirm the positive and negative surfaces of the door panels are not deformed, scratched, and so on.
3, Door seal. The door seal should be consistent with uniform width, crack width in 1-2mm.